Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller:
Features:
1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time سیستم عامل;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
جزئیاتs:
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5607 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
2212 920KV Brushless Motor:
Description:
Type: 22*12
KV: 920 rpm/V
Voltage: DC 7-12V
Weight: 60g
Color: White / Black
40A 2-4S ESC جزئیات:
BEC : 5V/3A
Li-ion/Li0poly:2-4S
Size: about 7.2×2.4cm (ESC with banana connector)
Weight: about 32g(with banana connector);
Note: This ESC is not able to flash the firmware.
Package Included:
1 x Quadcopter Frame Kit(Send it as your choice)
4 x 2212 920kv Motor
4 x Red Motor cover for 22 Series motor
4 x 40A 2-4S ESC
2pairs 1045 Propeller
1 x Battery belt
1 x Low Voltage Buzzer Alarm
1 x Pixhawk 2.4.8 32bit ARM Flight Controller (Because of different production batch, there are two kinds design of Pixhawk, send it at random.)
1 x Shock absorber
1 x Safety button and Buzzer
1 x 4G TF card (IO firmware has written)
1 x Power Module
1 x M8N GPS with GPS Holder
1 x I2C Splitter Expand Module
1 x PPM Module (Without shell , Green or Blue color board send at random)
1 x RGB Module (Without shell)
Note :
Before you connect with computer , please make sure the SD card has been inserted to the flight controller first, and then flash the firmware , or it can not connected , also the led indicator will not light .
Please make sure you read these wikis and videos before you use.
https://www.youtube.com/watch?v=Hdhn0E1hEYc
https://www.youtube.com/watch?v=uH2iCRA9G7k
http://ardupilot.org/copter/docs/common-pixhawk-overview.htm







نقد و بررسیها0
هیچ دیدگاهی برای این محصول نوشته نشده است.